Spin Master Boxer Robot Screen Replacement

Ultimo aggiornamento il February 7, 2024

5 minuti

Facile

Introduzione

If Spin Master Boxer’s screen is cracked, follow this step by step guide to replace it. You will need a Size 00 Philips Screwdriver to complete guide.

Cosa ti serve

Strumenti

Phillips #00 Screwdriver

Passo 1 Robot Screen

Spin Master Boxer Robot Screen Replacement, Robot Screen: passo 1, immagine 1 di 1

Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

Modifica

Passo 2

Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

Modifica

Passo 3

Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

Modifica

Passo 4

While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

Modifica