Introduzione

Make sure you can explore the Xplod very well.

Press down the release button on the bottom left corner of the face plate.
  • Press down the release button on the bottom left corner of the face plate.

  • Then remove the face plate carefully.

Aggiungi Commento

Aggiungi Commento

  • Using the Phillips #1 Screwdriver, unscrew the 2 thick screws (length - 7.69mm) located on both sides of the stereo.

  • Remove side-metal plates gently.

  • Use the Heavy-duty Spudger, insert the flat end under each of the black flaps indicated in the picture. Use leverage to pry and pop them loose.

Aggiungi Commento

  • Remove the black front plate of the stereo.

Aggiungi Commento

  • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (height - 7.47mm) on the top of the stereo.

  • Lift off the top plate.

Aggiungi Commento

  • Using the Phillips #0 Screwdriver, unscrew the 8 gold screws (length - 9.26mm), located on the back side of the stereo.

  • Using the Phillips #0 Screwdriver, unscrew the 2 black screws (length - 13.27mm), also located on the back of the stereo.

  • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (length - 9.3mm), located on the bottom of a hole as noted in pictures (2) and (3).

Aggiungi Commento

  • Carefully pull the fuse out of the back of the stereo.

Aggiungi Commento

  • Firmly grip the body of the stereo and pull off the silver back plate.

Aggiungi Commento

Aggiungi Commento

  • Using the Phillips #0 Screwdriver, unscrew the 2 gold screws (length - 7.34mm) found on both sides of the stereo.

Aggiungi Commento

  • Grip the top portion of the stereo, where the CD-Drive is located, and gently pull up to release it, but you will not be able to lift it all the way out.

  • Grab the two tabs located near the back of the stereo, and gently pull the CD-drive front the rest of the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chao Chen

Membro da: 04/10/2011

68 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-35, Amido Fall 2011 Membro di Cal Poly, Team 5-35, Amido Fall 2011

CPSU-AMIDO-F11S5G35

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 18

Tutti i Tempi: 3,054