Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
When the glue is warm slowly start prying from the top corner.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
If the glue is cooled down heat more. Don't force it.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the data cable from the phones body.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
If the screen works, remove the new screen and add the double sided tape
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now push town not to tight not to softly to the screen.
-
And that's it. You finished the screen replacement.
-
Annulla: non ho completato questa guida.
Altre 30 persone hanno completato questa guida.
5 Commenti
Good video! Help me too! Thanks
There is a thin, soft foam layer on the backside of the factory screen assembly, right behind the LCD backlight. This insulation foam is missing from most replacement screens. It can be peeled off relatively easily, but it will not stick easily onto the replacement LCD. I am not sure whether it is required at all, does anybody have experience and recommendations concerning this?
My lcd burn before use Heat gun! Very sad!
Use t7000 glue for glueing screen back down,sure way of it not lifting off