Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Apply heat to the edges.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • When the glue is warm slowly start prying from the top corner.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • If the glue is cooled down heat more. Don't force it.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 1
    • Remove the data cable from the phones body.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 1
    • Test if the new screen works properly.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 6, immagine 1 di 1
    • If the screen works, remove the new screen and add the double sided tape

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 7, immagine 1 di 1
    • Connect the new screen to the phone.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 8, immagine 1 di 1
    • Now push town not to tight not to softly to the screen.

    • And that's it. You finished the screen replacement.

Linea Traguardo

Altre 30 persone hanno completato questa guida.

jaanparker

Membro da: 01/21/16

952 Reputazione

1 Guida realizzata

5 Commenti

There is a very good Youtube video of this. I think these are screenshots from it.

Andrew - Replica

Good video! Help me too! Thanks

Clodoaldo Castro - Replica

There is a thin, soft foam layer on the backside of the factory screen assembly, right behind the LCD backlight. This insulation foam is missing from most replacement screens. It can be peeled off relatively easily, but it will not stick easily onto the replacement LCD. I am not sure whether it is required at all, does anybody have experience and recommendations concerning this?

sinistre - Replica

My lcd burn before use Heat gun! Very sad!

Clodoaldo Castro - Replica

Use t7000 glue for glueing screen back down,sure way of it not lifting off

Marcus Roach - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 18

Tutti i Tempi: 17,666