Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Piazza un iOpener caldo sul pannello posteriore del telefono per sciogliere l'adesivo al suo interno.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two bottom left 3.9 mm Phillips #000 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the spudger under the bottom left frame and lift, try to lift vertically to wedge it out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab hold of the bottom left frame and lift out carefully.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a spudger under the tab above the camera and lift to disconnect it.
-
Is it okay to use a hair dryer instead of iOpener?
091 03718 - Replica