Introduzione

This guide covers the Sony Xperia XZ Premium front camera removal. This process involves unscrewing two screws and removing part of the frame to reach the camera.

Parti

Nessuna parte richiesta.

Place a heated iOpener on the back panel of the phone to melt the adhesive inside.
  • Place a heated iOpener on the back panel of the phone to melt the adhesive inside.

  • The iOpener or your desired heat source can be very hot and can heat up the phone, so make sure you do not burn yourself.

  • Follow this guide for directions on using the iOpener.

Aggiungi Commento

Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.
  • Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.

Aggiungi Commento

  • Take hold of the back panel with your fingers and remove.

Aggiungi Commento

  • Remove the two bottom left 3.9 mm Phillips #000 screws.

Aggiungi Commento

  • Insert the spudger under the bottom left frame and lift, try to lift vertically to wedge it out.

Aggiungi Commento

  • Grab hold of the bottom left frame and lift out carefully.

Aggiungi Commento

  • Insert a spudger under the tab above the camera and lift to disconnect it.

Aggiungi Commento

  • Grab hold of the tab with your fingers.

Aggiungi Commento

  • Lift the camera from the phone by the tab.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gelene Amog

Membro da: 18/04/2018

759 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S18-G2, Livingston Spring 2018 Membro di Cal Poly, Team S18-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G2

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 50

Tutti i Tempi: 267