Introduzione

This guide will walk you through the process of replacing or taking off the back cover panel of the Sony Xperia XZ Premium with a heat source and a thin wedge. The heat source is very hot and can cause burning to the skin, so be very careful.

Parti

Nessuna parte richiesta.

  1. Place a heated iOpener on the back panel of the phone to melt the adhesive inside.
    • Place a heated iOpener on the back panel of the phone to melt the adhesive inside.

    • The iOpener or your desired heat source can be very hot and can heat up the phone, so make sure you do not burn yourself.

    • Follow this guide for directions on using the iOpener.

    Aggiungi Commento

  2. Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.
    • Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.

    Aggiungi Commento

    • Take hold of the back panel with your fingers and remove.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gelene Amog

Membro da: 18/04/2018

791 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S18-G2, Livingston Spring 2018 Membro di Cal Poly, Team S18-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G2

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 38

Tutti i Tempi: 281