Salta al contenuto principale

Sony Xperia XA Back Cover Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Sony Xperia XA Back Cover Replacement, Back Cover: passo 1, immagine 1 di 1
    • Apply heat on the back surface of the phone.

    • Continue to heat the device as needed throughout the replacement process.

    • The device can get very hot, so be careful when handling it.

  2. Sony Xperia XA Back Cover Replacement: passo 2, immagine 1 di 1
    • Stick the small suction cup on the bottom half of the back surface of the phone.

  3. Sony Xperia XA Back Cover Replacement: passo 3, immagine 1 di 3 Sony Xperia XA Back Cover Replacement: passo 3, immagine 2 di 3 Sony Xperia XA Back Cover Replacement: passo 3, immagine 3 di 3
    • With the bottom of the device facing you, lift up on the suction cup handle.

    • Use the plastic opening tool around all sides to pry off the back cover.

  4. Sony Xperia XA Back Cover Replacement: passo 4, immagine 1 di 3 Sony Xperia XA Back Cover Replacement: passo 4, immagine 2 di 3 Sony Xperia XA Back Cover Replacement: passo 4, immagine 3 di 3
    • Pull the back of the phone case away from the device.

    • You will hear popping sounds of glue being ripped from the phone.

    • You will hear the sound of the back unlatching from the device.

    • You will need to apply adhesive or glue along the device to have maximum seal in reassembly.

    • RAF antenna may be attached to the back cover upon removal.

  5. Sony Xperia XA Back Cover Replacement: passo 5, immagine 1 di 1
    • Apply heat to the copper RAF antenna.

    • This step and the following step only apply if the RAF antenna does not come off when taking the back cover off.

  6. Sony Xperia XA Back Cover Replacement: passo 6, immagine 1 di 1
    • Peel back the RAF antenna.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S17-G2, Livingston Spring 2018 Membro di Cal Poly, Team S17-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G2

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 61