Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the phone face-down, and use a heat gun or hair dryer to evenly heat the back surface until to soften the adhesive.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Attach a suction cup to the back of the M4 Aqua by carefully pushing down on it near the top of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back cover by pulling it from the chassis. it is flexible and can be bent, be careful.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unhook the battery connector carefully. It is possible to damage the battery if too much force is used.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the battery once all of the adhesive is broken, and the connector is unplugged.
-
Annulla: non ho completato questa guida.
Altre 16 persone hanno completato questa guida.
11 Commenti
Hi... do you need to add some adhesive to reassemble it? Thanks.
U actually buy another back end cover that has the adhesive....
I found that I could just push it back on with the original glue and it reattached ok.
Good video thanks.
I'm currently living in Thailand and they don't fix Sonys here in Krabi so I need to do it myself. Lazada has got the lcd and back cover for me, but they don't have a battery. I have a Sony Xperia aqua m4. Will the z3 battery fit...