Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the phone face-down, and use a heat gun or hair dryer to evenly heat the back surface until to soften the adhesive.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Attach a suction cup to the back of the M4 Aqua by carefully pushing down on it near the top of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back cover by pulling it from the chassis. it is flexible and can be bent, be careful.
-
Annulla: non ho completato questa guida.
Altre 17 persone hanno completato questa guida.
3 Commenti
Thanks. Do you know where to order a new back cover? Mine has shattered