Salta al contenuto principale


Replacing the back cover of the Sony Xperia M4 Aqua is somewhat different than on other phones, but the process is simple. Follow these steps:


Nessuna parte specificata.

  1. Sony Xperia M4 Aqua Back Cover, Back Cover: passo 1, immagine 1 di 1
    • Place the phone face-down, and use a heat gun or hair dryer to evenly heat the back surface until to soften the adhesive.

  2. Sony Xperia M4 Aqua Back Cover: passo 2, immagine 1 di 1
    • Attach a suction cup to the back of the M4 Aqua by carefully pushing down on it near the top of the phone.

  3. Sony Xperia M4 Aqua Back Cover: passo 3, immagine 1 di 2 Sony Xperia M4 Aqua Back Cover: passo 3, immagine 2 di 2
    • While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.

  4. Sony Xperia M4 Aqua Back Cover: passo 4, immagine 1 di 1
    • Remove the back cover by pulling it from the chassis. it is flexible and can be bent, be careful.


To reassemble your device, follow these instructions in reverse order.

Altre 17 persone hanno completato questa guida.

Brian McKalip

Membro da: 10/02/2016

2.088 Reputazione

2 Guide realizzate


USF Tampa, Team 4-5, Lacy Spring 2016 Membro di USF Tampa, Team 4-5, Lacy Spring 2016


3 Membri

8 Guide realizzate

3 Commenti

Thanks. Do you know where to order a new back cover? Mine has shattered

Michael McNicholas - Replica

Das ist kein Xperia Z3

Das ist eine Anleitung vom M4 Aqua

Faruk - Replica

Reassembling just in reverse order you’ll  get a non-dust and non-waterproof device and not normally fixed rear cover.  You have to apply special Sony Xperia M4 Aqua E2303 Adhesive Sticker, 56BTUL0030A.

Andrey - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 7,945