Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

In this manual we will show you how to do soft, hard (factory) reset and how to change firmware in case of forgotten Password, PIN, Pattern lock.

If you forgot your password and you can't log in your tablet with your Google account or backup PIN, then you must do factory reset.

This procedure will erase all your personal data.


Please SUBSCRIBE to my channel ツ

Panoramica Video

  1. Search and download Sony PC Companion or use the link below. Sony PC Companion Sony PC Companion
  2. Install PC Companion. Install PC Companion.
    • Install PC Companion.

  3. From here you can update firmware to your devise but it must be powered on not screen locked. Start "Support Zone". Select "Phone / Tablet Software Update".
    • From here you can update firmware to your devise but it must be powered on not screen locked.

    • Start "Support Zone".

    • Select "Phone / Tablet Software Update".

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. Your Laptop must be connected to the power adapter. Select "repair my phone / tablet". The last warning for your personal data.
    • Your Laptop must be connected to the power adapter.

    • Select "repair my phone / tablet".

    • The last warning for your personal data.

  6. PC Companion will download some files to prepare your PC for update. Your battery of the tablet must be charged at last 80%.
    • PC Companion will download some files to prepare your PC for update.

    • Your battery of the tablet must be charged at last 80%.

  7. Select your device.
    • Select your device.

  8. Switch off the tablet. If you can't do this, press and hold for more time the power on button. Press and hold the volume down button until you connect the micro USB cable. When the PC recognized the device, PC companion will download the latest firmware version and will upload it to your tablet.
    • Switch off the tablet. If you can't do this, press and hold for more time the power on button.

    • Press and hold the volume down button until you connect the micro USB cable.

    • When the PC recognized the device, PC companion will download the latest firmware version and will upload it to your tablet.

  9. If your PC can't recognize your tablet, you must install drivers for it. Search in the internet for "S1Boot Fastboot" drivers, or download the drivers from the link below. F1Boot Fastboot drivers F1Boot Fastboot drivers
    • If your PC can't recognize your tablet, you must install drivers for it. Search in the internet for "S1Boot Fastboot" drivers, or download the drivers from the link below.

    • F1Boot Fastboot drivers

  10. When PC Companion finished, disconnect the tablet and switch it on.
    • When PC Companion finished, disconnect the tablet and switch it on.

    • The device is at factory state, with the latest firmware version and erased security protection.

    • .

    • Did you do it successfully?

    • Please SUBSCRIBE to my channel ツ

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

172.454 Reputazione

307 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

294 Membri

942 Guide realizzate

How to remove a password, you need a password to do soo ....

Carol Sanchez - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 38

Ultimi 30 Giorni: 198

Tutti i Tempi: 57,492