Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Sony Vaio PCG-6J2L Hard Drive Replacement

Cosa ti serve

  1. Sony Vaio PCG-6J2L Hard Drive Replacement, Battery: passo 1, immagine 1 di 1
    • Set the computer display-side down.

    • Unlock the battery by sliding the port-side latch to the 'unlock' position.

  2. Sony Vaio PCG-6J2L Hard Drive Replacement: passo 2, immagine 1 di 1
    • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

  3. Sony Vaio PCG-6J2L Hard Drive Replacement, Keyboard: passo 3, immagine 1 di 1
    • Ignore the removal of the heat sink and memory panels as depicted. They do not need to be removed for the completion of this guide.

    • Remove the Torx security screw near the center of the battery-side edge.

  4. Sony Vaio PCG-6J2L Hard Drive Replacement: passo 4, immagine 1 di 2 Sony Vaio PCG-6J2L Hard Drive Replacement: passo 4, immagine 2 di 2
    • Press the tabs on each side of the display-side of the keyboard with the flat edge of a spudger.

    • Pull the keyboard toward the mouse pad and gently lift up.

  5. Sony Vaio PCG-6J2L Hard Drive Replacement: passo 5, immagine 1 di 2 Sony Vaio PCG-6J2L Hard Drive Replacement: passo 5, immagine 2 di 2
    • The keyboard is still attached by ribbon cable, don't try to remove the keyboard entirely yet.

    • Disconnect the ribbon cable by pressing the tabs on either side of the connector. Pull the cable out parallel to the connector.

    • Remove the keyboard.

  6. Sony Vaio PCG-6J2L Hard Drive Replacement, Mouse Assembly: passo 6, immagine 1 di 1
    • Turn the laptop upside down.

    • Remove the three screws from the front mouse panel located on the bottom of the laptop.

    • Carefully flip the laptop back over. Remove three more screws from the top securing the panel. A ribbon cable will still be attached to the panel when you remove it.

  7. Sony Vaio PCG-6J2L Hard Drive Replacement: passo 7, immagine 1 di 2 Sony Vaio PCG-6J2L Hard Drive Replacement: passo 7, immagine 2 di 2
    • Lift the mouse assembly just enough to access the connecting ribbon cable.

    • Lift the ribbon cable lock to remove the cable.

    • Carefully remove the mouse panel assembly and set aside.

  8. Sony Vaio PCG-6J2L Hard Drive Replacement, Hard Drive: passo 8, immagine 1 di 1
    • This is where your hard drive would be located. The replacement must be a Serial ATA(SATA) hard drive

    • Remove the four hard drive securing screws.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 20 persone hanno completato questa guida.

Team

Cal Poly, Team 25-89, Amido Spring 2010 Membro di Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Membri

63 Guide realizzate

3 Commenti

simple and perfect in every detail

francesco - Replica

como le cambio la pantalla a esta lap

Armand San - Replica

como le puedo cambiar el monitor a este modelo

Armand San - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 24

Tutti i Tempi: 40,118