Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Sony Vaio PCG-61112L Fan Replacement

Cosa ti serve

  1. Sony Vaio PCG-61112L Fan Replacement, Back case: passo 1, immagine 1 di 1
    • Turn the laptop over and orient it as shown.

  2. Sony Vaio PCG-61112L Fan Replacement: passo 2, immagine 1 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 2, immagine 2 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 2, immagine 3 di 3
    • Remove the battery by pinching the two lock tabs towards the center.

    • Next, lift up on the battery to remove it.

  3. Sony Vaio PCG-61112L Fan Replacement: passo 3, immagine 1 di 1
    • Using a Phillips #00 screwdriver, remove the twenty-two 5.6 mm screws from the back of the laptop.

    • Be sure to remove all screws, including those that are typically covered by the battery.

  4. Sony Vaio PCG-61112L Fan Replacement: passo 4, immagine 1 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 4, immagine 2 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 4, immagine 3 di 3
    • Now, remove the small covers from the back of the case.

    • Using a Phillips #00 screwdriver, unscrew the three 5.6 mm screws from the covers (one screw on the RAM cover [middle] and two screws on the Hard Drive cover [bottom right]).

    • Then, lift up on and remove these covers as shown in the third image.

  5. Sony Vaio PCG-61112L Fan Replacement: passo 5, immagine 1 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 5, immagine 2 di 3 Sony Vaio PCG-61112L Fan Replacement: passo 5, immagine 3 di 3
    • Remove the hard drive.

    • Using a Phillips #00 screwdriver, unscrew the two remaining 4.9 mm screws holding the hard drive into place.

    • Next, lift up and pull outwards to release the hard drive from its socket.

  6. Sony Vaio PCG-61112L Fan Replacement: passo 6, immagine 1 di 1
    • Using your fingers, grasp the black tab and lightly pull up on the ribbon cable to detach it from the motherboard.

  7. Sony Vaio PCG-61112L Fan Replacement: passo 7, immagine 1 di 1
    • After proper removal of all necessary screws, gently lift up on the back case to remove it.

  8. Sony Vaio PCG-61112L Fan Replacement, Fan: passo 8, immagine 1 di 3 Sony Vaio PCG-61112L Fan Replacement, Fan: passo 8, immagine 2 di 3 Sony Vaio PCG-61112L Fan Replacement, Fan: passo 8, immagine 3 di 3
    • Locate the fan (top-right corner of the computer).

    • Using a Phillips #00 screwdriver, unscrew the six 2.7 mm screws that secure the fan to the motherboard.

  9. Sony Vaio PCG-61112L Fan Replacement: passo 9, immagine 1 di 2 Sony Vaio PCG-61112L Fan Replacement: passo 9, immagine 2 di 2
    • This step can be skipped if you are just removing the fan to access another part of the device (such as the motherboard).

    • Using a Japanese Industrial Standard #00 screwdriver, unscrew four 3.7 mm screws located on the casing of the fan.

  10. Sony Vaio PCG-61112L Fan Replacement: passo 10, immagine 1 di 2 Sony Vaio PCG-61112L Fan Replacement: passo 10, immagine 2 di 2
    • Using your fingers, grasp the white tab and firmly, yet gently, pull up on the wire to disconnect it from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 12

Tutti i Tempi: 993