Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the computer on a flat surface with the top facing up.
-
Open the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the rubber screw caps at the two bottom corners of the screen.
-
Use your finger to remove the rubber screw caps.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the two screws, one on each bottom corner.
-
Unscrew the screws with a Phillips head size #0 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to gently lift the plastic casing that borders the screen.
-
Pop off the casing by working the tool around the outside of it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully flip down the screen so it rests on the keyboard.
-
Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.