Introduzione

In this guide we will be taking the smart watch out of its housing to remove its screen in order to reach the interior components. This process will only require a small tool with a flat edge.

Parti

Nessuna parte richiesta.

  1. Detach the smart watch from the band by pushing on the back of the watch housing.
    • Detach the smart watch from the band by pushing on the back of the watch housing.

      • The power button may fall out once the smart watch is detached.

    • Set aside the power button and watch band as they are no longer needed for further disassembly.

    Aggiungi Commento

  2. Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
    • Use a plastic opening tool to carefully pry the LCD screen from the watch housing.

    Aggiungi Commento

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.

    Aggiungi Commento

    • Set aside the detached LCD screen to access the battery.

    How can i find New sw2 screen

    Eren Can Gelen - Replica

Conclusione

To reassemble your device, follow these steps in reverse order.

Un'altra persona ha completato questa guida.

Vincent Shiue

Membro da: 22/01/2018

232 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G5, Freund Spring 2018 Membro di IUPUI, Team S1-G5, Freund Spring 2018

IUPUI-FREUND-S18S1G5

3 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 74

Tutti i Tempi: 690