Salta al contenuto principale

Sony SRS-XB43 Faceplate Replacement

Cosa ti serve

  1. Sony SRS-XB43 Faceplate Replacement, Faceplate: passo 1, immagine 1 di 2 Sony SRS-XB43 Faceplate Replacement, Faceplate: passo 1, immagine 2 di 2
    • Insert the metal spudger into the mesh's seam/opening located at the bottom of the speaker.

    • Begin applying pressure, prying along the run of the seam until the mesh cover begins to come loose.

    • Fully open the hinged mesh cover and pry it off the unit.

  2. Sony SRS-XB43 Faceplate Replacement: passo 2, immagine 1 di 1
    • Turn the speaker so the back is facing you.

    • Remove the factory tamper seal below the speaker volume toggle to reveal a single screw.

    • Remove the single screw using a T8 Torx.

  3. Sony SRS-XB43 Faceplate Replacement: passo 3, immagine 1 di 1
    • Remove all ten screws using a Phillips #1 screwdriver.

  4. Sony SRS-XB43 Faceplate Replacement: passo 4, immagine 1 di 2 Sony SRS-XB43 Faceplate Replacement: passo 4, immagine 2 di 2
    • Slowly lift the speaker face off of the housing unit.

    • Unplug the six wires connecting the faceplate to the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Membro da: 11/12/14

81.727 Reputazione

200 Guide realizzate

Team

iFixit Membro di iFixit

Staff

135 Membri

16.766 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 129