Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This repair may be needed if your device functions properly, but the indicator lights do not work.

  1. Remove the base by pushing in the button and sliding out the unit. Remove the base by pushing in the button and sliding out the unit.
    • Remove the base by pushing in the button and sliding out the unit.

  2. Remove USB port cover from back plate with a metal spudger. This will prevent the cover from falling under the back plate once it is removed. This will prevent the cover from falling under the back plate once it is removed.
    • Remove USB port cover from back plate with a metal spudger.

    • This will prevent the cover from falling under the back plate once it is removed.

  3. APRI TUTTE LE SCHEDE

    Kit espansione RAM per Mac

    Acquista Kit

    Abbastanza RAM
    Per tutte le schede

    Acquista Kit
  4. With the  Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate. With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
    • With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.

    • With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.

    • These screws have different threads and need to be kept separate.

  5. Remove back plate with a plastic opening tool by slowing prying around the entire plate. Be gentle to avoid breaking the plastic clips which hold the plate. Once separated the plate easily lifts off.
    • Remove back plate with a plastic opening tool by slowing prying around the entire plate.

    • Be gentle to avoid breaking the plastic clips which hold the plate.

    • Once separated the plate easily lifts off.

  6. With the Phillips #02 screwdriver, remove the two 5mm length x 5mm head screws located on the left and right side of the light bar board. With the Phillips #02 screwdriver, remove the two 5mm length x 5mm head screws located on the left and right side of the light bar board. With the Phillips #02 screwdriver, remove the two 5mm length x 5mm head screws located on the left and right side of the light bar board.
    • With the Phillips #02 screwdriver, remove the two 5mm length x 5mm head screws located on the left and right side of the light bar board.

  7. Remove the light bar by depressing the tab on the white data connector. Remove the light bar by depressing the tab on the white data connector.
    • Remove the light bar by depressing the tab on the white data connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kyle Franck

Membro da: 01/10/2015

209 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 12-16, Maness Fall 2015 Membro di Cal Poly, Team 12-16, Maness Fall 2015

CPSU-MANESS-F15S12G16

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 382