Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the base by pushing in the button and sliding out the unit.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove USB port cover from back plate with a metal spudger.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
-
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove back plate with a plastic opening tool by slowing prying around the entire plate.
-
Once separated the plate easily lifts off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the Phillips #01 screwdriver, remove the two 5 mm length x 7 mm head screws from the top and bottom of the control button bar.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Detach the control button bar by depressing the small white tab that connects the bar to its wires.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.