Aggiusta la tua roba Comunità Store

Sony PS-LX300USB Dust Cover Replacement

Introduzione

The dust cover is one of the key components of a PS-LX300USB Turntable. The dustcover keeps all of the fragile components safe from dust and other potential hazards. The repair is relatively easy and can be important in maintaining your turn table.

Cosa ti serve

  1. Sony PS-LX300USB Dust Cover Replacement, Dust Cover: passo 1, immagine 1 di 1

    • Turn the turntable around so that the back side is visible.

    Modifica

  2. Sony PS-LX300USB Dust Cover Replacement: passo 2, immagine 1 di 2 Sony PS-LX300USB Dust Cover Replacement: passo 2, immagine 2 di 2

    • Begin by releasing the left latch. Apply downward pressure to the square, black button using a flathead screw driver.

    • Once the latch is released, lift upward.

    • Use your left hand to hold the left side of the dust cover above the latch. This ensures the latch does not reconnect.

    Modifica

  4. Sony PS-LX300USB Dust Cover Replacement: passo 3, immagine 1 di 1

    • Use a flat head screw driver to apply pressure to the black square button on the right side.

    Modifica

  5. Sony PS-LX300USB Dust Cover Replacement: passo 4, immagine 1 di 2 Sony PS-LX300USB Dust Cover Replacement: passo 4, immagine 2 di 2

    • Once both the right and left buttons are released, pull the dust cover upwards.

    • The dust cover is now disconnected and ready for replacement.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Sean

Membro da: 09/27/17

109 Reputazione

1 Guida realizzata

Distintivi: 2

Team

Cal Poly, Team S8-G3, Banghart Fall 2017 Membro di Cal Poly, Team S8-G3, Banghart Fall 2017

CPSU-BANGHART-F17S8G3

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 18

Tutti i Tempi: 2,288