Introduzione

In order to keep your device in working order, the tape transport unit may need to be replaced.

Parti

Nessuna parte richiesta.

Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
  • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

Aggiungi Commento

Remove the five (5) Phillips #00 cassette side screws.
  • Remove the five (5) Phillips #00 cassette side screws.

Aggiungi Commento

  • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

Aggiungi Commento

  • Remove the Phillips #00 screw holding the microphone on.

Aggiungi Commento

  • Remove the two (2) Phillips #00 screws from lens side cover.

Aggiungi Commento

  • Slide the lens side cover away from camera.

Aggiungi Commento

  • Remove the Phillips #00 screw from the tape transport slider.

Aggiungi Commento

  • Remove the four (4) Phillips #00 screws located on the top of the camera.

Aggiungi Commento

  • Remove the electrical connector from camera.

Aggiungi Commento

  • The tape transport unit is now free from the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Emma

Membro da: 06/10/2011

47 Reputazione

4 Guide realizzate

Team

UW Stout, Team 1-4, Zhou Fall 2011 Membro di UW Stout, Team 1-4, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G4

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 15

Tutti i Tempi: 2,292