Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 6 mm screws from beneath the battery using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the microphone cover using the iFixit opening tool.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 6 mm screws from the front of the phone beneath the microphone cover using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the black plastic piece on the side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the iFixit opening tool to loosen the motherboard from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the motherboard out with your fingers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two cable connectors using the iFixit opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the rotational assembly remove the following screws:
-
Four 3 mm screws
-
Two 2.3 mm screws
-
Lift the rotational assembly off of the phone to allow access to the other half of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Detach the cable connectors on the other end of the cables using a plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the plastic cover on the back of the phone using an iFixit opening tool.
-
Remove the four 6 mm screws using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the screen assembly from the main case using the iFixit opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the face plate and LCD screen exposed, replace the existing LCD screen with a new LCD screen.
-