Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will help you replace the camera in your Sony Ericsson Experia Pro MK16A phone. Follow along to install a new camera in about half an hour.

  1. Use a plastic opening tool to get the back cover off your phone. The plastic opener will work on any side, but be careful and pry gently. The plastic opener will work on any side, but be careful and pry gently.
    • Use a plastic opening tool to get the back cover off your phone.

    • The plastic opener will work on any side, but be careful and pry gently.

  2. Locate the battery in your phone.
    • Locate the battery in your phone.

    • Find the divot below the battery.

    • Use your thumb to lift the battery out of the phone.

  3. Remove the 4 black screws with the Phillips screwdriver. Remove the 4 silver screws with the Torx screwdriver. Remove the 4 silver screws with the Torx screwdriver.
    • Remove the 4 black screws with the Phillips screwdriver.

    • Remove the 4 silver screws with the Torx screwdriver.

  4. Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.
    • Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

  5. Remove the last screw that is connecting the logic board using the Phillips screwdriver. Undo the two ribbons. Undo the two ribbons.
    • Remove the last screw that is connecting the logic board using the Phillips screwdriver.

    • Undo the two ribbons.

  6. Undo that last connector. Undo that last connector. Undo that last connector.
    • Undo that last connector.

  7. Lift the camera off of its connector on the logic board. Lift the camera off of its connector on the logic board.
    • Lift the camera off of its connector on the logic board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Sean Gallagher

Membro da: 16/10/2014

68 Reputazione

1 Guida realizzata

Team

Hi,

my Sony Ericsson Xperia Pro MK16i fell onto the stone floor and now the auto focus of the camera does not work anymore. It takes photos, but they are mostly blurred. Do you know if changing the camera part would fix this problem or is the auto focus function set in some other part than the camera itself? Thank you.

Andrea - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 828