Introduzione

This guide provides instruction for installing a back case for the Sony Ericsson TM506 cell phone.

Parti

Nessuna parte richiesta.

Firmly hold the phone between your fingers with your thumb on the battery cover.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

Aggiungi Commento

Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

Aggiungi Commento

  • Remove the two rubber casings for the top two screws with a plastic opening tool.

Aggiungi Commento

  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

Aggiungi Commento

  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Minnal

Membro da: 09/07/2012

16 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 1-1, Regan SU 2012 Membro di Cal Poly, Team 1-1, Regan SU 2012

CPSU-REGAN-SU12S1G1

2 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 434