Introduzione

This guide will help you to remove the keypad from your Sony Ericsson T68i.

Parti

Nessuna parte richiesta.

  1. Remove the battery from the back. Remove the battery from the back.
    • Remove the battery from the back.

  2. Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips.
    • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

    • Do not bend it too far down, or else you risk breaking the two bottom clips.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Unscrew all four Torx T6 screws. Keep in a safe place. Keep in a safe place.
    • Unscrew all four Torx T6 screws.

    • Keep in a safe place.

  5. After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart.
    • After removing the screws, the two halves will separate. If not, then pry them gently apart.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tim Dascomb

Membro da: 13/04/2010

123 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 26-34, Regan Spring 2010 Membro di Cal Poly, Team 26-34, Regan Spring 2010

CPSU-REGAN-S10S26G34

4 Membri

13 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,982