Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
If the device is on but nothing shows up on the screen, the screen may need to be replaced.
Cosa ti serve
-
-
-
Remove the four rubber feet and the screws beneath.
-
Remove the two exposed screws on the left side.
-
Pull back the cables until the screw is visible.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.