Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In order to access the internals of the device, the cover must be removed. If there is a problem with one of the components on the cover, it may need to be replaced.
Cosa ti serve
-
-
Remove the five exposed 7.9 mm Phillips screws using the spudger.
-
Punch through the warranty sticker with the spudger.
-
Remove the screw underneath.
-
-
Quasi finito!
To reassemble your device, follow these instructions in reverse order.
Conclusione
To reassemble your device, follow these instructions in reverse order.