Cosa ti serve
-
-
-
Move side panel to get access to screws
-
Remove two screws (black 2.5mm) with PH #0 screwdriver
-
-
Attrezzo utilizzato in questo passaggio:Tweezers$4.99
-
Carefully remove the gold ribbons from the ports of the motherboard by lifting the gray tabs and pulling away the ribbon
-
You may want to use tweezers to remove the gold ribbons as a more delicate and safe approach, but this is not required
-
-
-
Carefully remove the last gold ribbon by lifting the gray tab and sliding out the ribbon.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.