Aggiusta la tua roba Comunità Store

Sony Cyber-shot DSC-W800 LCD Screen Replacement

Introduzione

Some things to consider before you work on the Sony Cyber-shot DSC W800 to replace the LCD Screen:

  • The LCD Screen is an integral part of the device and any improper handling can cause issues in other parts of the camera.
  • Be cautious when removing ribbon wires.
  • Be sure to keep track of all pieces that are taken apart.

Cosa ti serve

  1. Sony Cyber-shot DSC-W800 LCD Screen Replacement, Button Board: passo 1, immagine 1 di 3 Sony Cyber-shot DSC-W800 LCD Screen Replacement, Button Board: passo 1, immagine 2 di 3 Sony Cyber-shot DSC-W800 LCD Screen Replacement, Button Board: passo 1, immagine 3 di 3

    • Remove the five 4.0 mm Phillips #000 screws on the back panel.

    Modifica

  2. Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 2, immagine 1 di 2 Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 2, immagine 2 di 2

    • Using the Spudger, remove the back panel from the device.

    • The loose piece circled in the picture will most likely fall off the camera housing.

    Modifica

  4. Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 3, immagine 1 di 3 Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 3, immagine 2 di 3 Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 3, immagine 3 di 3

    • Remove the two 2.15mm Phillips #000 screws from the circuit board.

    • Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.

    • Ribbon wires can easily be damaged.

    Modifica

  5. Sony Cyber-shot DSC-W800 LCD Screen Replacement, LCD Screen: passo 4, immagine 1 di 1

    • Remove the four 3.75 mm Phillips #000 screws from the LCD back panel.

    Modifica

  6. Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 5, immagine 1 di 1

    • Lift the back panel and separate the LCD Screen by prying it up.

    • Remove the back panel.

    Modifica

  7. Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 6, immagine 1 di 2 Sony Cyber-shot DSC-W800 LCD Screen Replacement: passo 6, immagine 2 di 2

    • Gently pull on the ribbon wire disconnecting from the ZIF connector (connecting the LCD screen to the motherboard) with the tweezers.

    • Ribbon wires can be easily damaged.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Thomas Campo

Membro da: 02/09/16

788 Reputazione

4 Guide realizzate

Distintivi: 16

+13 altri distintivi

Team

USF Tampa, Team 17-5, Blackwell Winter 2016 Membro di USF Tampa, Team 17-5, Blackwell Winter 2016

USFT-BLACKWELL-W16S17G5

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 16

Tutti i Tempi: 2,437