Cosa ti serve
-
-
Remove the two Phillips head, 2.93 mm long screws at the bottom of the camera.
-
-
-
-
These are the two cables connecting the LCD screen to the motherboard below the screen.
-
-
-
After camera is disassembled the capacitor will need to be removed. Use tweezers to gently pull away the ribbon from the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.