Introduzione

Knowledge of how to remove the outer casing is necessary to replace it. (See guide)

Parti

Nessuna parte richiesta.

  1. Find the hatch labeled "open" on the left side of the bottom of the camera.
    • Find the hatch labeled "open" on the left side of the bottom of the camera.

    • Slide the hatch in the direction that the arrow is pointing. The hatch will open outward on its own.

    Aggiungi Commento

  2. Slide the blue locking tab to release the battery. Slide the battery out of the camera.
    • Slide the blue locking tab to release the battery. Slide the battery out of the camera.

    Aggiungi Commento

    • Replace hatch and rotate camera 180 degrees. You should still be looking at the bottom of the camera.

    • Remove the four 2.5mm Philips #0 screws.

    Aggiungi Commento

    • Turn the camera so the left side-panel faces you. (It says 5x Optical Zoom)

    • Remove the two 2.5mm Philips #0 screws.

    • You may have to remove the screws with a pair of tweezers when the screws are almost out.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Turn the camera so the right side faces you.

    • Remove the two 2.5mm Philips #0 screws.

    • You may have to remove the screws with a pair of tweezers when the screws are almost out.

    Aggiungi Commento

    • Rotate camera so that the back is facing you.

    • Pull the back casing directly away from the LCD screen.

    Aggiungi Commento

    • Turn the camera so that the left side is facing you.

    • Pull the left side-panel off of the camera.

    Aggiungi Commento

    • Turn camera so that the front of the camara is facing you.

    • Pull the front casing directly away from the camera.

    • The right side panel may fall off when you take the front panel off.

    Aggiungi Commento

    • Turn the camera so that the right side is facing you.

    • Pull the right side-panel away from the rest of the camera.

    Aggiungi Commento

    • This is what your camera should look like now that you have removed the casing from all sides.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Evan Mayer

Membro da: 05/10/2010

318 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 7-54, Amido Fall 2010 Membro di Cal Poly, Team 7-54, Amido Fall 2010

CPSU-AMIDO-F10S7G54

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,643