Introduzione

This guide will explain how to take the necessary components of the camera apart in order to replace a damaged LCD display screen.

Align the camera so that the side with "4x Optical Zoom" is facing toward you.
  • Align the camera so that the side with "4x Optical Zoom" is facing toward you.

  • Gently twist the bottom corner clockwise until you feel the side panel unlock.

  • Lift off the side panel and set aside.

Aggiungi Commento

Rotate the camera 180 degrees to face the side panel with the lanyard loop on it.
  • Rotate the camera 180 degrees to face the side panel with the lanyard loop on it.

  • Gently lift the panel vertically until it lifts off

  • Take care to not lose the small rectangular portion on the bottom of the panel.

Aggiungi Commento

  • Position the camera so the bottom is facing up and the display away from the surface.

  • Gently pry the screen portion from the camera portion with your fingers or a plastic prybar.

  • Do not fully separate the two components! the screen is attached by two ribbon cables.

  • Lay the display flat to expose the circuit board and the display control ribbon cables.

Aggiungi Commento

  • Using a flat head screw driver gently pry up the tab securing the ribbon cable from the display screen to the camera sensor and battery housing.

  • Remove the ribbon cable connecting LCD display to camera sensor and battery housing

  • Following the same procedure as above, uninstall the ribbon cable connecting the main camera controls to the camera sensor and battery housing

Aggiungi Commento

  • The LCD display screen is now removed from the camera sensor and battery housing.

  • The main camera controls are now removed from the camera sensor and battery housing.

Aggiungi Commento

  • Unsnap LCD display screen from its mount by unsnapping it from the display screen using your finger nail.

  • Now the new LCD screen can be installed.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Michael Henry

Membro da: 09/03/2012

21 Reputazione

1 Guida realizzata

Team

Clemson, Team 2-3, Benson Spring 2012 Membro di Clemson, Team 2-3, Benson Spring 2012

CLEM-BENSON-S12S2G3

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,957