Menü

Le tue impostazioni

Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi
Il Mio Carrello

Sembra che il tuo carrello sia vuoto

Sfoglia il Nostro Negozio

Sony Cyber-shot DSC-W150 Back Casing Replacement

Scritto Da: iRobot (e 6 altri collaboratori)
  • Commenti: 0
  • Preferiti: 1
  • Completamenti: 4

Difficoltà

Molto facile

Passi

7

Tempo Necessario

5 minuti

Sezioni

1

Contrassegni

2

Grammar Police

Vigilanza sulla Grammatica

Adotta il tuo insegnante di inglese interno e contribuisci a migliorare la grammatica di questa guida!

Member-Contributed Guide

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Introduzione

This repair guide will aid you in the steps to disassemble the Sony Cyber-shot DSC W150 in order to replace a scratched or broken back casing.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte richiesta.

  1. The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

    • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

    Traduci

  2. Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

    • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

    Traduci

  3. On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

    • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

    Traduci

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

  5. On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

    • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

    Traduci

  6. Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

    • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

    Traduci

  7. Now, carefully pull off the back cover.

    • Now, carefully pull off the back cover.

    Traduci

  8. The two halves of the camera casing should now be separate.

    • The two halves of the camera casing should now be separate.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

iRobot

Membro da: 24/09/2009

1 Reputazione

623 Guide realizzate

Distintivi: 35

+32 altri distintivi

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 4,702