Introduzione

The sliding lens cover is on the front of the camera, and moves vertically to hide or expose the lens and flash. It may need to be replaced if it becomes stuck.

Parti

Nessuna parte richiesta.

Remove screws from outside of camera. There are 6 screws total.
  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Aggiungi Commento

Use screwdriver to remove screws.
  • Use screwdriver to remove screws.

Aggiungi Commento

  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Aggiungi Commento

  • The front cover is now removed from the camera and the internal hardware is now exposed.

Aggiungi Commento

  • The front sliding lens cover.

Aggiungi Commento

  • Remove four screws using Phillips located on the inside of the front cover.

Aggiungi Commento

  • Remove front sliding lens cover.

Aggiungi Commento

  • The front sliding lens cover is now removed and may be repair or replaced.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Membro da: 11/03/2013

189 Reputazione

10 Guide realizzate

Team

Clemson, Team 13-1, Benson Spring 2013 Membro di Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 639