Introduzione

This guide will teach the user how to disassemble and access the CCD module for replacement or installation.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Aggiungi Commento

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Aggiungi Commento

  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Aggiungi Commento

  • Use screwdriver to remove screws.

Aggiungi Commento

  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Aggiungi Commento

  • The front cover is now removed from the camera and the internal hardware is now exposed.

Aggiungi Commento

  • This is the CCD module.

Aggiungi Commento

  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Aggiungi Commento

  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Aggiungi Commento

  • The CCD module is now removed from the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Stephannie Allen

Membro da: 11/03/2013

189 Reputazione

10 Guide realizzate

Team

Clemson, Team 13-1, Benson Spring 2013 Membro di Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 517