Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Parti

Nessuna parte specificata.

  1. There are 4 screws total holding the outer shell of the camera. One on each corner. To reach the bottom two, you have to slide the camera cover up. Vise versa for the top two. Make sure to remove the battery before taking the camera apart.
    • There are 4 screws total holding the outer shell of the camera. One on each corner. To reach the bottom two, you have to slide the camera cover up. Vise versa for the top two.

    • Make sure to remove the battery before taking the camera apart.

  2. Separate the front and back housings carefully. Be careful not to pry it apart as they are connected together by the LCD ribbon cables.
    • Separate the front and back housings carefully.

    • Be careful not to pry it apart as they are connected together by the LCD ribbon cables.

    • Once you have separated the two housings unplug the LCD ribbon cables.

    • There should be three. One big one and two small ones

    • Remove the LCD screen from the housing.

    • You'll have to carefully lift the internal components of the camera in order to remove the LCD screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chelsea Vitone

Membro da: 21/01/2015

213 Reputazione

2 Guide realizzate

Team

UWT Liner: Group 4 Membro di UWT Liner: Group 4

Community

6 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 169