Salta al contenuto principale

Introduzione

This guide gives step-by-step instructions on getting to the main internal component of the Cyber-shot DSC-T1 and then specifies how to detach them from the camera.

Ricambi

Nessuna parte specificata.

  1. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Battery: passo 1, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Battery: passo 1, immagine 2 di 2
    • Locate the battery door at the bottom of the camera.

    • Press down on the door and slide it back. The door will pop open.

  2. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 2, immagine 1 di 1
    • Remove the battery from the door that you opened in the previous step.

  3. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Disassembling Sony Cyber-shot DSC-T1 Removing Front Cover: passo 3, immagine 1 di 3 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Disassembling Sony Cyber-shot DSC-T1 Removing Front Cover: passo 3, immagine 2 di 3 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Disassembling Sony Cyber-shot DSC-T1 Removing Front Cover: passo 3, immagine 3 di 3
    • There are two screws on the left and right sides of the camera, and two screws on the bottom.

    • Use a PH00 screwdriver and remove the six 2.9mm screws.

  4. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 4, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 4, immagine 2 di 2
    • Use hands to gently pry the front casing away from the camera.

  5. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, CCD Sensor Module: passo 5, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, CCD Sensor Module: passo 5, immagine 2 di 2
    • Use the tip of a spudger to flip up the tab on the ZIF connector securing the motherboard ribbon cable.

    • The second picture shows what these tabs look like in their open positions.

  6. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 6, immagine 1 di 1
    • Grasp the CCD Sensor Module and remove it.

  7. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Flash Module: passo 7, immagine 1 di 3 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Flash Module: passo 7, immagine 2 di 3 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Flash Module: passo 7, immagine 3 di 3
    • This camera houses a very strong capacitor (the black cylinder). Avoid touching anything around the two wires coming out of the top. Doing so will risk serious electric shock.

    • Carefully disengage the internal components from the casing by lifting at the bottom end and giving a gentle tug.

    • The components are still connected to the casing via cables, but they are much more maneuverable.

    • The flash module is shown on the right hand side.

  8. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 8, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 8, immagine 2 di 2
    • Use the tip of a spudger to flip up the tab on the ZIF connecter securing the motherboard ribbon cable.

    • Grasp the flash module by the bottom and remove it.

  9. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Motherboard Assembly: passo 9, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement, Motherboard Assembly: passo 9, immagine 2 di 2
    • Use tweezers to slide the white piece on the back of the back cover to the right.

    • This will dislodge the white piece, allowing you to remove it from the back cover.

  10. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 10, immagine 1 di 1
    • Use the tip of a spudger to flip up the tab on the ZIF connector securing the motherboard ribbon cable.

    • Remove the ribbon cables from these two ZIF connectors.

  11. Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 11, immagine 1 di 2 Sony Cyber-shot DSC-T1 Motherboard Assembly Replacement: passo 11, immagine 2 di 2
    • Lift the motherboard assembly up and rotate it so you can easily see where the internals connect to the back cover.

    • Remove the ZIF connectors from the clamp on the left end of the top piece.

    • The motherboard assembly is now separated from the back cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

iDeleted

Membro da: 07/07/2010

2.101 Reputazione

39 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 2,020