Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the cover on the bottom of the camera.
-
Slide the cover towards the back of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate and remove the 3mm screws on the top and sides of the camera with the size 00 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the two halves of the camera apart.
-
Place the two halves down with the insides facing you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Find the two clips holding the motherboard to the black lens box.
-
Slide the plastic opening tool in between the ribbon and the black part of the clip, then flip it. (If difficult, your fingernail can also be used)
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After releasing the clips, pull out black lens box.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool to flip the clip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the white part and slide it to the right until it clicks.
-
Pull out the flash.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.