Aggiusta le tue cose Community Store

Sony Cyber-shot DSC-P52 LCD Replacement

Introduzione

The LCD should be checked if the screen is blank or broken.

Cosa ti serve

  1. Sony Cyber-shot DSC-P52 LCD Replacement, Outer Case: passo 1, immagine 1 di 1

    • Open the battery compartment and remove the batteries.

    • Remove all of the visible screws on the outside of the case.

    • There should be three of them that are all easily located.

    Modifica

  2. Sony Cyber-shot DSC-P52 LCD Replacement: passo 2, immagine 1 di 1

    • Open the memory card compartment.

    • Remove the screw next to the memory card slot.

    Modifica

  3. Sony Cyber-shot DSC-P52 LCD Replacement: passo 3, immagine 1 di 1

    • Pull apart the front and back cover pieces carefully.

    • The front cover should come completely free with little effort.

    • The back cover will still be attached to the circuit board.

    Modifica

  4. Sony Cyber-shot DSC-P52 LCD Replacement: passo 4, immagine 1 di 1

    • Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.

    • The circuitry will still be connected to the back case by ribbon cables.

    Modifica

  5. Sony Cyber-shot DSC-P52 LCD Replacement: passo 5, immagine 1 di 1

    • Open the case as shown.

    Modifica

  7. Sony Cyber-shot DSC-P52 LCD Replacement: passo 6, immagine 1 di 1

    • Unclip the clip holding the ribbon cable in.

    • Other ribbon cables might not have a clips.

    Modifica

  8. Sony Cyber-shot DSC-P52 LCD Replacement: passo 7, immagine 1 di 1

    • Pull the ribbon cable out.

    Modifica

  9. Sony Cyber-shot DSC-P52 LCD Replacement, Sony Cyber-shot DSC-P52 Removing Ribbon Cables: passo 8, immagine 1 di 1

    • Unclip the ribbon cable shown the in picture.

    • Some ribbon cables do not have a clip holding them in.

    Modifica

  10. Sony Cyber-shot DSC-P52 LCD Replacement: passo 9, immagine 1 di 1

    • Pull the ribbon cable out.

    Modifica

  11. Sony Cyber-shot DSC-P52 LCD Replacement, LCD: passo 10, immagine 1 di 1

    • Remove 7 Screws to remove plate and expose LCD screen.

    Modifica

  12. Sony Cyber-shot DSC-P52 LCD Replacement: passo 11, immagine 1 di 1

    • Remove LCD plate to expose LCD components and ribbon cables

    Modifica

  13. Sony Cyber-shot DSC-P52 LCD Replacement: passo 12, immagine 1 di 1

    • Check connection of LCD to cables

    • If cables are intact, disconnect cables and replace LCD with new part

    Modifica

  14. Sony Cyber-shot DSC-P52 LCD Replacement: passo 13, immagine 1 di 1

    • Repeat steps in reverse order to reassemble the camera

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Mark

Membro da: 01/11/11

16 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 3-43, Regan Winter 2011 Membro di Cal Poly, Team 3-43, Regan Winter 2011

CPSU-REGAN-W11S3G43

4 Membri

20 Guide realizzate

1Commento della guida

I don’t know the cause of my camera not turning on.

Smgmc64 Productions - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 20

Tutti i Tempi: 2,609