Aggiusta la tua roba Comunità Store

Sony Cyber-shot DSC-HX100V Viewfinder Replacement

Introduzione

If you have a faulty viewfinder and would like to know how to replace it yourself, this guide will show you how to do just that. By following these 6 simple steps, you will have your camera repaired within a few minutes and you will also save a couple of bucks.

Cosa ti serve

  1. Sony Cyber-shot DSC-HX100V Viewfinder Replacement, Viewfinder: passo 1, immagine 1 di 1

    • Make sure camera is turned off.

    • Press the ON/Off button to turn off the camera.

    • WARNING: Data may be lost if the camera remains on.

    Modifica

  2. Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 2, immagine 1 di 3 Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 2, immagine 2 di 3 Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 2, immagine 3 di 3

    • Use the Phillips screwdriver size #00 to remove the 1.59mm #00 screws.

    • Remove 2 screws from the side of the camera.

    • Remove 4 screws on the bottom of the camera.

    • Remove 1 screw next to the eyepiece.

    Modifica

  4. Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 3, immagine 1 di 1

    • Flip the screen back to reveal 2 hidden screws.

    • Remove the two 1.59mm #00 screws on the left with the Phillips #00 screwdriver.

    Modifica

  5. Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 4, immagine 1 di 1

    • Pull the back panel of the camera upward.

    • Use a spudger to help pry open the back panel.

    Modifica

  6. Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 5, immagine 1 di 1

    • Open the back panel to view the inside of the camera.

    • If the orange ribbon cable disconnects from its designated port, do not panic. The cable is easy to reinsert.

    Modifica

  7. Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 6, immagine 1 di 3 Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 6, immagine 2 di 3 Sony Cyber-shot DSC-HX100V Viewfinder Replacement: passo 6, immagine 3 di 3

    • Carefully pull out the the eyepiece.

    • Detach the orange ribbon cable that connects it to the green panel by carefully pulling outwards.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Un commento

Thank you very much for the importent articles made for us. If I can please put , how to replace the flasher as well.

Satsara Gunaratne - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 912