Introduzione

This guide will teach you how to take off the screen on the Sony Cyber-shot DSC-H300.

Parti

Nessuna parte richiesta.

  1. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws.
    • Remove the 6mm Phillips #000 screws.

  2. Remove the five 6mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws.
    • Remove the five 6mm Phillips #000 screws.

    • Remove the four 3mm Phillips #000 screws.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Use the flat end of a  plastic spudger to pry apart the rear cover from the body of the camera.
    • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

  5. Remove the two 6mm Phillips #000 screws.
    • Remove the two 6mm Phillips #000 screws.

  6. The screen will be loose so remove it.
    • The screen will be loose so remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zachary Meyer

Membro da: 14/02/2018

383 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S1-G6, Nance Spring 2018 Membro di USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 24

Tutti i Tempi: 298