Introduzione

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

Parti

Nessuna parte richiesta.

Remove the 6mm Phillips #000 screws.
  • Remove the 6mm Phillips #000 screws.

Aggiungi Commento

Remove the five 6mm Phillips #000 screws.
  • Remove the five 6mm Phillips #000 screws.

  • Remove the four 3mm Phillips #000 screws.

Aggiungi Commento

  • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team S1-G6, Nance Spring 2018 Membro di USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 27

Tutti i Tempi: 133