Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Parti

Nessuna parte specificata.

  1. Slide open the battery cover and remove the battery and the Memory Stick Duo. Return the battery cover to its closed position.
    • Slide open the battery cover and remove the battery and the Memory Stick Duo.

    • Return the battery cover to its closed position.

  2. Remove all three screws from the bottom of the camera.
    • Remove all three screws from the bottom of the camera.

  3. Remove the screws on the left and right sides of the camera. Remove the screws on the left and right sides of the camera.
    • Remove the screws on the left and right sides of the camera.

  4. Press down on the flash cover to raise the flash. Remove both screws that hold the flash cover to the body of the camera. Remove both screws that hold the flash cover to the body of the camera.
    • Press down on the flash cover to raise the flash.

    • Remove both screws that hold the flash cover to the body of the camera.

  5. Place the camera upside down with the battery port positioned upward.
    • Place the camera upside down with the battery port positioned upward.

    • Slide open the battery port.

  6. Pry the front cover of the camera off with the plastic opening tool. Pry the front cover of the camera off with the plastic opening tool. Pry the front cover of the camera off with the plastic opening tool.
    • Pry the front cover of the camera off with the plastic opening tool.

  7. Remove the power shutter unit.
    • Remove the power shutter unit.

  8. Unscrew the screw located at the back left corner of the flash component. Set the flash component aside.
    • Unscrew the screw located at the back left corner of the flash component.

    • Set the flash component aside.

  9. Remove the two screws from the bottom of the motherboard.
    • Remove the two screws from the bottom of the motherboard.

  10. Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.
    • Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.

  11. Flip the metal frame over to the left side of the camera and onto the surface on which you are working. Flip the metal frame over to the left side of the camera and onto the surface on which you are working.
    • Flip the metal frame over to the left side of the camera and onto the surface on which you are working.

  12. Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand. Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.
    • Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Rachel Payne

Membro da: 23/02/2015

356 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 1-1, Leahy Winter 2015 Membro di USF Tampa, Team 1-1, Leahy Winter 2015

USFT-LEAHY-W15S1G1

3 Membri

5 Guide realizzate

Thank you so much. I could successfully open the camera and got the LCD display out. But I couldn't find out how to replace the LCD, I wanted to mean where to open the LCD cable?

ummejamil - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,290