Introduzione

Keeping the back panel in good condition is key to extending the lifetime of the camera.

Parti

Nessuna parte richiesta.

  1. Power down the camera and remove the batteries.
    • Power down the camera and remove the batteries.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing. There are six 5.22mm long, 3.00mm head diameter screws total. The left side is not shown but there should be 1 screw on that side.
    • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

    • There are six 5.22mm long, 3.00mm head diameter screws total.

    • The left side is not shown but there should be 1 screw on that side.

  4. Remove the back casing. The casing itself is sturdy so don't be afraid to remove it forcefully.
    • Remove the back casing.

    • The casing itself is sturdy so don't be afraid to remove it forcefully.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Baylor, Team S5-G4, Williams Spring 2018 Membro di Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 98