Salta al contenuto principale

Introduzione

Rear Cover Removal allows the inside of the Clie to be exposed for further replacement of internal components

Parti

Nessuna parte specificata.

  1. Tools needed:
    • Tools needed:

    • Tweezers

    • Philips Screwdriver

  2. Using Phillips screwdriver, remove 4 screws from the rear cover. Remove 1 screw from the right side. Remove 1 screw from the top
    • Using Phillips screwdriver, remove 4 screws from the rear cover.

    • Remove 1 screw from the right side.

    • Remove 1 screw from the top

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Gently pry rear cover to remove USB port cover and Hold Switch. Gently pry rear cover to remove USB port cover and Hold Switch.
    • Gently pry rear cover to remove USB port cover and Hold Switch.

  5. Remove side cover. Gently pull the rear cover to separate from device.
    • Remove side cover.

    • Gently pull the rear cover to separate from device.

  6. Slowly pull rear cover from device being careful not to pull the speaker connection wire.
    • Slowly pull rear cover from device being careful not to pull the speaker connection wire.

    • Remove speaker wire from device.

    • The rear cover is now separated from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 3,407