Salta al contenuto principale

Introduzione

Use this guide if your radio is not working and the antenna needs to be replaced. This is an easy part to replace and requires a standard Phillips #1 screwdriver.

Ricambi

Nessuna parte specificata.

  1. Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.
    • Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver.

    • Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Tess

Membro da: 14/10/2014

439 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 10-38, Amido Fall 2014 Membro di Cal Poly, Team 10-38, Amido Fall 2014

CPSU-AMIDO-F14S10G38

5 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 21

Tutti i Tempi: 1,752