Salta al contenuto principale

Sony CDX-GT540UI Face-Plate Eject Lever Replacement

Cosa ti serve

  1. Sony CDX-GT540UI Face-Plate Eject Lever Replacement, Front Panel: passo 1, immagine 1 di 1
    • Locate face-plate eject button.

  2. Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 2, immagine 1 di 2 Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 2, immagine 2 di 2
    • Press the eject button.

    • Remove the face-plate.

  3. Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 3, immagine 1 di 3 Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 3, immagine 2 di 3 Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 3, immagine 3 di 3
    • Remove two 4.9mm Phillips #00screws on the front of the device.

    • Remove two 7.5mm Phillips #00screws on the front of the device.

    • When the screws are removed, the eject lever may fall into the device. Make sure the device is held horizontal and level.

  4. Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 4, immagine 1 di 2 Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 4, immagine 2 di 2
    • Rotate device 90 degrees to either side.

    • Use the plastic opening tool to pry open the top and bottom tab respectively.

    • Repeat on opposite side.

  5. Sony CDX-GT540UI Face-Plate Eject Lever Replacement: passo 5, immagine 1 di 1
    • Remove front panel.

  6. Sony CDX-GT540UI Face-Plate Eject Lever Replacement, Face-plate Eject Lever: passo 6, immagine 1 di 1
    • Remove the eject lever.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

USF Tampa, Team 10-2, Brown Fall 2014 Membro di USF Tampa, Team 10-2, Brown Fall 2014

USFT-BROWN-F14S10G2

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,678