Aggiusta la tua roba Comunità Store

Sony Bloggie 3D Player Back Cover Replacement

Introduzione

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

Cosa ti serve

  1. Sony Bloggie 3D Player Back Cover Replacement, Front Cover: passo 1, immagine 1 di 1

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

    Modifica

  2. Sony Bloggie 3D Player Back Cover Replacement: passo 2, immagine 1 di 2 Sony Bloggie 3D Player Back Cover Replacement: passo 2, immagine 2 di 2

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

    Modifica

  4. Sony Bloggie 3D Player Back Cover Replacement, Back Cover: passo 3, immagine 1 di 2 Sony Bloggie 3D Player Back Cover Replacement, Back Cover: passo 3, immagine 2 di 2

    • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

    Modifica

  5. Sony Bloggie 3D Player Back Cover Replacement: passo 4, immagine 1 di 2 Sony Bloggie 3D Player Back Cover Replacement: passo 4, immagine 2 di 2

    • Use a plastic opening tool to loosen the back cover off the device.

    • Once the back cover is loose, remove it gently by hand.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Timothy Tran

Membro da: 01/30/13

1 Reputazione

2 Guide realizzate

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 7-12, Maness Winter 2013 Membro di Cal Poly, Team 7-12, Maness Winter 2013

CPSU-MANESS-W13S7G12

5 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 7

Tutti i Tempi: 388