Introduzione

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.
  • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

Aggiungi Commento

Use a plastic opening tool to pry the cover open.
  • Use a plastic opening tool to pry the cover open.

  • After the the cover is partly open as shown, remove the cover with your hands.

Aggiungi Commento

  • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

Aggiungi Commento

  • Use a plastic opening tool to loosen the back cover off the device.

  • Once the back cover is loose, remove it gently by hand.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Timothy Tran

Membro da: 30/01/2013

1 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 7-12, Maness Winter 2013 Membro di Cal Poly, Team 7-12, Maness Winter 2013

CPSU-MANESS-W13S7G12

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 275