Aggiusta la tua roba Comunità Store

Sony BDP-BX620 Port Board Replacement

Cosa ti serve

  1. Sony BDP-BX620 Port Board Replacement, Outer Cover: passo 1, immagine 1 di 2 Sony BDP-BX620 Port Board Replacement, Outer Cover: passo 1, immagine 2 di 2

    • Power on the device, eject the disk tray, and power off the device.

    • Turn the device over.

    • Lightly apply downward pressure on the black covering on the disk tray until it comes off.

    • Caution, applying too much pressure can break the black covering.

    Modifica

  2. Sony BDP-BX620 Port Board Replacement: passo 2, immagine 1 di 2 Sony BDP-BX620 Port Board Replacement: passo 2, immagine 2 di 2

    • Turn the device around.

    • Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.

    • Slide the side covers on either side towards the back of the device.

    • There is a back cover on either side of the device.

    Modifica

  4. Sony BDP-BX620 Port Board Replacement: passo 3, immagine 1 di 3 Sony BDP-BX620 Port Board Replacement: passo 3, immagine 2 di 3 Sony BDP-BX620 Port Board Replacement: passo 3, immagine 3 di 3

    • This step might require someone to help unclasping the plastic clips.

    • Turn the device so that the bottom is facing up.

    • In the bottom, unclip the three plastic clips circled in red.

    • On either side, unclip the plastic clip circled in red

    • Slide the black covering forwards to remove.

    • All five clips have to be unclasped for the covering to be removed.

    • Careful not to break the plastic clips when putting it back on.

    Modifica

  5. Sony BDP-BX620 Port Board Replacement, Port Board: passo 4, immagine 1 di 2 Sony BDP-BX620 Port Board Replacement, Port Board: passo 4, immagine 2 di 2

    • Now, spot the large ribbon cable that connects between the motherboard and the port board.

    • Remove the cable by pulling upwards.

    • Be careful when pulling upwards on the ribbon cable. Too much force can cause it to rip.

    Modifica

  6. Sony BDP-BX620 Port Board Replacement: passo 5, immagine 1 di 1

    • Use your Phillips screwdriver to take out the silver screw holding in the port board.

    Modifica

  7. Sony BDP-BX620 Port Board Replacement: passo 6, immagine 1 di 1

    • Now use the tweezers to unclip the portboard on the side.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Zachery Zavala

Membro da: 10/05/16

175 Reputazione

2 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

USF Tampa, Team 1-6, Lacy Fall 2016 Membro di USF Tampa, Team 1-6, Lacy Fall 2016

USFT-LACY-F16S1G6

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 156